> For the complete documentation index, see [llms.txt](https://wiki.kscucf.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b.md).

# TSat-2B

Overview of TSat-2B, the live video and telemetry half of the TSat-2 mission.

TSat-2B was the electronics and software half of the [TSat-2](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2.md) mission. Its goal was to fly a 1.5U satellite on a moored balloon to about 500 ft while sending all of its video and data to the ground in real time.

The satellite carried two systems that ran independently of each other:

* **Live video:** a Raspberry Pi Zero 2 W and camera running [OpenHD](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/openhd.md), streaming over Wi-Fi to a laptop ground unit.
* **Live telemetry:** a custom PCB with an ESP32, a BMP388 barometer and temperature sensor, an MMA8451 accelerometer, an RFM69HCW 915 MHz radio, and an SD card. See [Electronics and PCB](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/electronics-and-pcb.md) and [Live Telemetry Code](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/live-telemetry-code.md).

## Flight

TSat-2B flew first on March 28, 2026 from the UCF Arboretum. It reached about 450 ft, and both the live video and the live telemetry worked for the whole flight of about 30 minutes. It stayed tethered and was recovered by reeling the balloon back in. Video and telemetry plots are on the [Results](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/results.md) page.

## Pages

* [Mission Goal and Overview](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/mission-goal-and-overview.md): what the mission set out to do
* [Satellite Body](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/satellite-body.md): the 3D-printed 1.5U structure
* [Electronics and PCB](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/electronics-and-pcb.md): parts lists for both systems
* [OpenHD](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/openhd.md): how the live video system was set up
* [Live Telemetry Code](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/live-telemetry-code.md): how the telemetry software works
* [Results](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/results.md): flight video and data
* [Timeline](https://wiki.kscucf.org/projects/tethered-satellite/t-sat-2/t-sat-2-project-b/timeline.md): how the project went from kickoff to launch
