> For the complete documentation index, see [llms.txt](https://wiki.kscucf.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.kscucf.org/projects/past-projects/knight-satellite.md).

# Knight Satellite

The project that started the club.

Knight Satellite (KS-1, also called KnightSat-1) was the club's first satellite project: an Interorbital Systems (IOS) TubeSat 2.0 kit with a student-built three-axis reaction wheel attitude determination and control system (ADCS). It never launched. The TubeSat now serves as demo hardware at recruiting events, and in 2026 its reaction wheels were brought back to life for [TSat-3A](https://wiki.kscucf.org/projects/tethered-satellite/tsat-3.md).

{% hint style="info" %}
KS-1 is not related to UCF's earlier KnightSat (2006) and KnightSat II (2011) research projects, which were not run by this club.
{% endhint %}

## Timeline

* **2020:** The club started as KnightSatClub, raised money, and bought the TubeSat kit. The purchase was finalized in April 2020 and the kit arrived in October 2020 after months of shipping delays.
* **Spring–Summer 2021:** The ADCS became the project of UCF ECE Senior Design Group 21, whose four members were all club members. Club subsystem teams (astrionics, flight software, reaction wheel, and communications) worked alongside them. A reaction wheel machined at UCF spun to 14,820 RPM in March 2021, and the communications team built a SatNOGS ground station.
* **2021–2022:** A launch on an IOS rideshare was planned but never happened, and the club's focus moved to [KAOS](https://wiki.kscucf.org/projects/knights-air-observation-satellite.md).
* **Fall 2022–Spring 2023:** The club tried to revive KS-1 and get the reaction wheels working. Serial communication was restored, but without schematics the team couldn't drive all three motors, and work stopped in April 2023.

## Design

**Bus.** The TubeSat 2.0 is a kit satellite, not a standard CubeSat. It has an ATmega2560 main board, a 433 MHz radio, a BMX160 inertial measurement unit (IMU), lithium-ion cells, and body-mounted solar panels.

**ADCS.** Three Precision Microdrives 712-100 brushless motors, each with a TI DRV10964 motor driver and a TPS61232 boost regulator, sit on a custom round PCB designed in KiCad that connects to the TubeSat main board. The reaction wheels were machined at UCF from lead sheet: about 20 mm across (set by the gap between the kit's standoffs), 3.175 mm (1/8 in) thick, and about 11 g each. Arduino-based code reads the IMU and speeds up or slows down each wheel to counter the satellite's rotation.

**Results.** The goal was to bring the satellite's spin to 0.0 ± 0.1 °/s on all three axes. Each motor was tested clockwise and counterclockwise, all three ran together at different speeds, and a power test ran three motors at 5 V and 7,500 RPM for 7.5 hours. Closed-loop stabilization was demonstrated on the Z axis only, with the TubeSat hanging from a ball-bearing hub on nylon wire, because a frictionless three-axis test wasn't feasible. By the team's calculations, one wheel at 14,000 RPM can cancel about 5 RPM of satellite spin.

## Lessons learned

From the Senior Design report:

* Fund the budget up front, order spare parts, and consolidate shipping.
* Check that motor drivers don't need proprietary software. The first driver tried needed proprietary software and 5 V logic, which cost the team a test motor and driver.
* Expect part shortages. The first-choice boost regulator's lead time jumped to 35 weeks, forcing a switch to the TPS61232.

## Club name history

The club has changed its name twice:

1. **KnightSatClub** (2020)
2. **The Collegiate Space Foundation at UCF** (CSF), from January 2021
3. **Knights Satellite Club** (KSC), the current name

## Links

* [Senior Design Group 21 project site](https://www.ece.ucf.edu/seniordesign/sp2021su2021/g21/): final presentation and demonstration videos, the conference paper, and the Senior Design report. The team was Mark Barbaro, Daniel Cadena, Andy Garcia, and Islam Aly, sponsored by Interorbital Systems and NASA's Florida Space Grant Consortium.
